其它工具-增压泵,气液增压泵 ,齐发国际app,液体增压泵,气体增压泵

 板牙工具 Threading Tool                                                                               

• Threading Tool can be threaded manual making L.H. screw , is an essential tool for high pressure Tubing.

板牙工具可手动制作钢管的左旋螺纹,是超高压管件加工的必备工具。

• Design of the guide sleeve , ensure the concccentricity of processing.

设计有导向套,保证了加工的同心度。

                                                     TT6板牙工具

型号说明 Model description

板牙操作说明 Threading operation instruction

• Claming fixed block of coning tool(horizontal or vertical installation).

把CT工具上的固定块固定(水平或者垂直安装)。

• Loosen the tighten gland nut , and remove the handle together.

把旋转螺母松开和手柄一起拿掉。

• The pipe cone inserts into the chuck outward , and lock the gland(As shown in the following figure).

松开螺母,把钢管锥面朝外插进夹头里面锁紧螺母(如下图所示)。

• In the observation hole drops into the cutting oil , to maintain lubricating on blade teeth.

在板牙工具上的观察孔上滴进切削油,使牙刃上保持润滑。

• Hold the handle with both hands , the threading hole pressing to trap the cone end , in a counter clockwise rotating forcibly tools , turn back after each turn 1~2 rounds , chip cutting discharge , then turned into , according to the required length of the left-hand thread cutting out , finally inversion tools completely out.

双手握住手柄,把板牙孔压紧套住管锥端,逆时针用力转动工具, 每转动1~2转就要退转,使切削屑排出,再进转,根据所需长度把左旋螺纹切削出来,最后反转工具完全退出,板牙完成。

 板牙和锥面尺寸 Threading Size and Cone                                                        

 倒内圆锥工具 Reseating Tool                                                                         

• Reseationg tools is used to repair old or damaged valve or equipment connector.

倒内圆锥工具用于维修旧的或是损坏的阀门或是连接件的内孔。

 弯管器 Bending Tool                                                                                     

• Applicable to high pressure steel pipe , outer diameter 1/4" , 3/8" , 9/16".

适用于高压钢管外径1/4"、3/8"、9/16"。



 
QQ在线咨询
咨询热线
0755-27967260
销售热线
18688799549